ICC DURRA 1H Fire Door set 800 x 2100 (mm) with View Panel 150 x 600 (mm) Door Frame 60 x 100 (mm)

DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.DURRA Fire Door sash.
The Door sash is designed with DURRA core which is fire rated 120 integrity and 120 insulation fitted on Tulang Class I hard wood timber regal with density up to 650kg/m² and a thickness of 58 mm to provide the above 120 Min of Insulation and Integrity against a potential fire threat. The thickness of the door prevents Door deforming towards fire during a burn up, and protects/sustains through Air pressure build ups during a fire. It provides ample mass for poor charring and carbonizing which prolongs the fire spread.
DURRA Smoke and Fume seals 20 x 2 (mm) Single line.
DURRA fire Door sash is fitted with a 20 x 2 (mm) Single line Intumescent Smoke and Fume seal to provide longer integrity of 120 Min, and also to prevent the dangers of Hazard’s Smoke and hot air which occurs long before the fire and which results in a fire spread and poses a threat to life.
Fire and smoke protection fit into a groove on the leaf edge is preferred due to lower resistance it encounters on closing, thus avoiding sticking door leaves on site.
DURRA Timber Door Frame
The risk of premature failure of fire doors due to the distortion of their timber frames can be ignored if the frame has been formed from straight- grained material like tulang hard wood Class I with high density of 650kg/m² and is adequately fixed to the surrounding structure. The rate of charring of timber frames is of much greater significance. Charring rate is generally closely linked to timber density. Higher the density and larger the section have proved by test to be suitable as door frames for required fire rating up to 120 mints.